Uniflow™ Powder Measure

The Uniflow Powder Measure throws consistently accurate charges reload after reload. Powder pours uniformly from the measuring cylinder and into case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. The unit changes easily from charge to charge without emptying powder hopper. Note: The Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run.

Small Drum meters volumetric powder charges from 0.5-40 Grains.

Large Drum meters volumetric powder charges from 10-110 Grains.

Note: Do not use with Black Powder.

• Numbered measuring screw is used for reference to find a given charge at a later date
• The measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit
• Standard 7/8-inch–14 threads
• Stand plate is drilled for easy mounting on a bench or under a reloading die lock ring
• Includes two drop tubes for 22 caliber and up
• Capable of accurately measuring all three major powder types—ball, cylindrical and flake
• Cuts cylindrical powders so a precise charge can be obtained